Potential 3U 19" enclosure to design to About › Forums › Omega-Design › Potential 3U 19" enclosure to design to This topic contains 1 reply, has 2 voices, and was last updated by macaba 1 year ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 8th September 2017 at 12:56 PM #61 adminKeymaster I just happen to have one of these cases unused and gathering dust. They’re not cheap, but it’s a good start to think about an sensible maximum overall size. Of course, the back plane mount and cards don’t even need an enclosure unless it needs to be moved. https://drive.google.com/file/d/0B7XklT4vO-hyWElnX1ZycVc3ekU/preview?usp=drivesdk This topic was modified 1 year, 1 month ago by admin. This topic was modified 1 year, 1 month ago by admin. This topic was modified 1 year, 1 month ago by admin. This topic was modified 1 year, 1 month ago by admin. 20th September 2017 at 3:50 PM #182 macabaParticipant I use the Schroff range as their 3D CAD models are easiest to get hold of (and they’re accurate unlike others I’ve used) and availability from distributors is excellent: https://schroff.pentair.com/en/schroff/19-rack-mount-case The case will probably be the singular most costly part so my suggestion would be to design using the Schroff CompacPRO 3D CAD models and then we could later develop a budget laser-cut acrylic case option that is roughly IEC 60297-3-102 compatible. Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.